Replacing old Light Bulbs with LED

Posted on: May 16th, 2025 by Aaron McGregor No Comments

Replacing old Light Bulbs with LED

If you’ve ever looked around your home and noticed those ancient lights that you have to keep replacing, then now might be the time to consider replacing old light bulbs with LED. If you’re ready to make the switch to LED lighting in your Boronia Park home – you’re not alone – more and more locals are upgrading to LEDs to save money, lower their energy use, and enjoy safer, more modern lighting.

At ACE Sydney Electricians, we’re here to make the change easy and affordable. Whether you’re replacing a single bulb or updating your entire lighting setup, this guide gives you everything you need to know.

How to Replace Incandescent Light Bulbs with LEDs?

It’s a quick and simple process that anyone can do.

Switch off the power and let the old bulb cool completely.
Gently remove the old halogen or incandescent bulb.
Screw in the new LED bulb – be careful not to overtighten.

Most LED bulbs are made to fit the same socket as your existing bulbs, so no extra tools or fittings are usually needed.

How to Find the Appropriate Lumens for Your Light

Unlike old bulbs, LED lights are measured in lumens, not watts. Use this guide to get the right brightness:

60W old-style bulb ≈ 800 lumens LED
75W bulb ≈ 1100 lumens LED
100W bulb ≈ 1600 lumens LED

Always check the lumen count on the packaging to make sure you’re getting the light level you want.

How to Choose Incandescent Alternatives?

When choosing LED bulbs to replace older lights in your Boronia Park home, keep the following in mind:

Match the bulb base (usually printed on the old bulb).
Use non-dimmable LEDs unless you have a dimmer switch that’s LED-compatible.
For ceilings or hard-to-reach lights, integrated LED fixtures can be a smarter, longer-lasting choice.

A Few Reasons To Upgrade

Still wondering if the switch is worth it? Here are some solid reasons why Boronia Park locals are choosing LED lighting:

✅ Save on Energy

LEDs use up to 88% less power than traditional halogen bulbs.

✅ Longer Lifespan

LED bulbs can last over 12 years, compared to just 12–15 months for halogens.

✅ Safer for Your Home

LEDs stay cool to the touch – no more heat buildup or fire risks.

✅ Lower Your Carbon Footprint

LEDs are an environmentally friendly choice thanks to their lower energy use.

✅ Cut Your Power Bills

Replacing just 20 halogens with LEDs can save you up to $326 every year.

Not All LED Lights Are Equal

Not all LED products are made the same. Be sure to:

Choose well-known, high-quality brands.
Look for products with a warranty.
Select the right colour temperature – soft white for living rooms, cooler white for kitchens and bathrooms.

LED Downlights Vs Halogen Lighting

Got halogen downlights in your Boronia Park property? It might be time for an upgrade.

Why LED Downlights Make Sense:

No more ceiling heat stains: LEDs stay cool, even after hours of use.
Custom lighting: Choose between warm, cool, or even smart lighting setups.
Energy efficiency: Lower bills and better lighting all around.

FAQs about LED Lighting

Can I use LED bulbs in my current fittings?
Yes – as long as the base matches and you’re not using a non-compatible dimmer.

Are LEDs safe to use outdoors?
Yes, just make sure they’re rated for outdoor or wet conditions.

Will LEDs save me money in the long run?
Definitely. Even though LEDs can cost a little more upfront, the long-term savings on energy and replacement bulbs are huge.

FAQs about ACE Sydney Electricians

Do you service Boronia Park and nearby areas?
Yes, we do! We’re proud to offer our services to Boronia Park, Hunters Hill, Gladesville, and the broader Sydney area.

Can you help with LED upgrades?
Absolutely. We can handle everything from replacing a few bulbs to upgrading your entire home with energy-efficient LED solutions.

Do you install LED downlights and plug-in systems?
Yes. We can set up plug-in LED downlights so you can easily maintain or upgrade your lighting without needing an electrician each time.

Are your electricians qualified?
All our electricians are fully licensed and experienced, with a strong focus on safety, energy efficiency, and customer satisfaction.

Final Thoughts: LED Lighting for Boronia Park Homes

If you’re ready to upgrade your lighting, LED bulbs are the clear winner. They’re better for your budget, your safety, and the planet.

And when you’re ready to make the switch, ACE Sydney Electricians is here to help. We’ve helped many Boronia Park locals enjoy better lighting and lower bills – now it’s your turn.

Check out our Facebook page, for electrical service reminders and other easy to follow information.

While you’re looking up at your light fittings, why not all ensure your smoke alarm is in good working order.

Replacing Lights with LED

Posted on: April 16th, 2025 by Aaron McGregor No Comments

Replacing Lights with LED

Ever looked around your home at your old light fittings and wondered if its time to take the leap into replacing lights with LED ? Switching from old-fashioned incandescent or halogen light bulbs to LED lighting is one of the easiest ways to save money, reduce your energy use, and upgrade the look and feel of your home. At ACE Sydney Electricians, we help Gladesville locals and surrounding Sydney suburbs make this smart switch every day.

Here’s your simple, practical guide to LED lighting – what it is, why it matters, and how to make the change.

How to Replace Incandescent Light Bulbs with LEDs?

Changing over to LED is easier than you think.

Turn off the power and let the old bulb cool down.
Carefully remove the old incandescent or halogen bulb – use gloves if needed.
Screw in the new LED bulb. Don’t overtighten.

✅ Good news: Most LED bulbs have the same base size as incandescent ones, so it’s usually a quick swap.

How to Find the Appropriate Lumens for Your Light

LED lights are measured in lumens, not watts. Here’s a quick guide to get the same brightness as your old bulbs:

60W incandescent ≈ 800 lumens LED
75W incandescent ≈ 1100 lumens LED
100W incandescent ≈ 1600 lumens LED

Tip: Look at the lumen count on the packaging, not just the wattage.

How to Choose Incandescent Alternatives?

When picking the right LED alternative, make sure you:

Match the bulb base type (e.g. A19, A21 – you’ll see it printed on the bulb).
Choose non-dimmable LEDs unless you have a compatible dimmer switch.
Consider integrated LED fixtures for hard-to-reach spots – they last longer and are often more efficient.

A Few Reasons To Upgrade

There are plenty of benefits when you make the switch to LED lighting in your home or business:

✅ Energy Savings

LEDs use up to 88% less energy than halogens or incandescent lights.

✅ Long Life

LEDs can last up to 12 years, while halogens last just over a year.

✅ Safety

LEDs stay cool to the touch – no more fire hazards or burnt fingers.

✅ Lower Carbon Footprint

Using less electricity means lower emissions.

✅ Save Money

Replacing 20 halogen bulbs with LEDs can save you around $326 per year on your power bills!

Not All LED Lights Are Equal

Cheap LED bulbs often don’t last or may flicker. Here’s what to look for:

Reputable brands
Warranty or lifespan guarantee
Correct brightness and colour temperature (soft white for bedrooms, daylight for workspaces)

LED Downlights Vs Halogen Lighting

Swapping old halogen downlights for LED downlights is one of the best upgrades you can make.

Benefits of LED Downlights:

Easy Maintenance: Swap bulbs yourself in the future.
No Heat Marks: LEDs run cool, protecting your ceiling.
Better Comfort: Enjoy soft, warm or cool lighting to suit every room.
Smart Home Ready: Many LED lights now work with smart home systems.

Installation Tips:

Plug-in downlights are safest and easiest for future changes.
Hardwired setups are best handled by a licensed electrician.
Building or renovating? Ask about Clipsal QuickConnect plugs – they’re great for future-proofing your lighting.

FAQs about LED Lighting

Can I use LED bulbs in all my existing fittings?
Yes, in most cases. Just make sure the base fits and check for dimmer compatibility.

Are LED lights better for the environment?
Absolutely. They use less power and last longer, which means less waste and fewer emissions.

Can I use LED lights in outdoor fixtures?
Yes – just make sure the bulb or fixture is rated for outdoor or wet use.

FAQs about ACE Sydney Electricians

Do you service Gladesville and nearby areas?
Yes! We proudly help homeowners and businesses across Gladesville , Ryde, and the greater Sydney region.

Do you offer LED lighting upgrades?
Absolutely. Whether it’s a full LED retrofit or just replacing a few bulbs, we’ve got you covered.

Can you install plug-in downlights?
Yes – we can safely install plug bases so you can change your own downlights in the future, saving you money.

Are your electricians licensed?
Yes, all our electricians are fully licensed, insured, and experienced with LED lighting systems.

Final Thoughts: Why Choose LED Lighting?

When it comes to LED vs halogen, LED lighting comes out on top in every category – energy savings, safety, lifespan, environmental impact, and long-term costs.

If you’re looking to upgrade your lighting in Gladesville or surrounding suburbs, get in touch with ACE Sydney Electricians. We’re here to help you choose the right products and make sure your install is fast, safe, and future-ready.

ACE can help with many of your lightning needs – like installing chandeliers, adding sensor or flood lights to your property. Wonder how else we can help – check out our list of services here.

We also have a Youtube channel with easy to follow videos to help solve electrical issues around your home.

Like the energy saving benefits that LED’s provide, why not check out other energy saving methods for your Gladesville property.

Epping Electrician Light Installs

Posted on: October 6th, 2023 by Aaron McGregor No Comments

Need new lights, looking to fix or replace broken ones in your Epping Home ? Choose ACE to install lights in your Epping Home : Epping Electrician Light Installs

Call ACE on 1300 796 500 for your local Epping electrician

Did you know that in Australia, it is illegal for consumers to install or wire electrical fixtures in their homes or offices, even if they learned how to do this by watching YouTube videos or looking up the steps on Google. After all, while electrical power is beneficial, it is very dangerous. It can injure or kill, if not handled properly. It can start fires if it passes worn out fixtures or those that are not properly installed. So instead of trying your hand at wiring or installing electrical fixtures yourself, choose ACE to install lights in your Epping home.

ACE will perform the following steps to ensure that a new lighting fixture for your Epping 2121 home will definitely work.

Removing The Old Light

1. ACE will disable your home’s circuit by cutting power to it. Once this is done ACE performs a double-check of electrical flow to the light by switching it on to see if it stays off.
2. ACE will clean the old fixture and the installation area. A clean area, after all, can help make installation easier and safer.
3. If necessary, ACE will remove the covering of the old fixture to expose the bulb.
4. All lighting fixtures have mounting brackets to keep them in place, so the next step is to unmount the fixture. They will be unscrewed and removed so the fixture can be taken out with ease.
5. ACE will lower the unscrewed fixture to expose the grounding wire, neutral wire, and hot wire. Wires will then be uncoupled., making sure to twist the wiring cap so the wires can be freed from each other.
6. The old light is then disengaged from the wires, by twisting the wiring cap loose. Once the light has been released from the wiring, the current fixture can then be set aside.

Installing new lighting in your home can make a feature of your decor

Installing The New Light

1. ACE will always ensure that your new light is compatible with your fixture. The mounting hardware, in many cases, should fit the bracket that has already been installed. But ACE can provide advice on whether a new bracket is necessary.
2. While working, ACE will check the age of your home’s wires – especially if your home was built before the mid-Eighties. Old wires, particularly those manufactured before the middle of the Eighties, have weaker insulation than newer wires. Wires with weak insulation are more likely to start fires.
3. Next, all coloured wires are joined together.
4. ACE will then ground the fixture. Any remaining wire should be screwed onto the mounting hardware of the light fixture so current can be safely dispersed.
5. The next step is to fasten the fixture to the mounting bracket to secure it.
6. And finally ACE will test the newly-installed fixture. This is done by restoring the flow of electrical power to the room.

For light installation or repairs in Epping call ACE your local electrician on 1300 796 500

As you can see there are many steps invovled. Let ACE, with years of experience and a focus on safety, reliabilitly and providing a cost effective service take care of your Epping light installation and repair.

Want to learn more about the types of lights that may suit your home. Watch our Youtube video here that explains the advantages of downlights.

Learn about the other services ACE can provide at your Epping home, here.

Choose ACE to install lights in your Macquarie Park Home

Posted on: September 7th, 2023 by Aaron McGregor No Comments

Need new lights, looking to fix or replace broken ones in your Macquarie Park Home ? Choose ACE to install lights in your Macquarie Park Home

ACE will perform the following steps to ensure that a new lighting fixture for your Macqaurie Park 2113 home will definitely work.

Removing The Old Light

1. ACE will disable your home’s circuit by cutting power to it. Once this is done ACE performs a double-check of electrical flow to the light by switching it on to see if it stays off.
2. ACE will clean the old fixture and the installation area. A clean area, after all, can help make installation easier and safer.
3. If necessary, ACE will remove the covering of the old fixture to expose the bulb.
4. All lighting fixtures have mounting brackets to keep them in place, so the next step is to unmount the fixture. They will be unscrewed and removed so the fixture can be taken out with ease.
5. ACE will lower the unscrewed fixture to expose the grounding wire, neutral wire, and hot wire. Wires will then be uncoupled., making sure to twist the wiring cap so the wires can be freed from each other.
6. The old light is then disengaged from the wires, by twisting the wiring cap loose. Once the light has been released from the wiring, the current fixture can then be set aside.

Installing new lighting in your home can make a feature of your decor

Installing The New Light

1. ACE will always ensure that your new light is compatible with your fixture. The mounting hardware, in many cases, should fit the bracket that has already been installed. But ACE can provide advice on whether a new bracket is necessary.
2. While working, ACE will check the age of your home’s wires – especially if your home was built before the mid-Eighties. Old wires, particularly those manufactured before the middle of the Eighties, have weaker insulation than newer wires. Wires with weak insulation are more likely to start fires.
3. Next, all coloured wires are joined together.
4. ACE will then ground the fixture. Any remaining wire should be screwed onto the mounting hardware of the light fixture so current can be safely dispersed.
5. The next step is to fasten the fixture to the mounting bracket to secure it.
6. And finally ACE will test the newly-installed fixture. This is done by restoring the flow of electrical power to the room.

As you can see there are many steps invovled. Let ACE, with years of experience and a focus on safety, reliabilitly and providing a cost effective service take care of your Macquarie Park light installation and repair.

Want to learn more about the types of lights that may suit your home. Watch our Youtube video here that explains the advantages of downlights.

Learn about the other services ACE can provide at your Macquarie Park home, here.

Things To Consider About Chandeliers

Posted on: January 5th, 2018 by Ace No Comments

Things To Consider About Chandeliers

Choosing a chandelier isn’t just about picking something beautiful—it’s about fit, function, and safety. From size and ceiling height to structural support and wiring compliance, smart planning ensures your new lighting becomes a focal point—not a fixture fiasco. So here is your guiude to the things to consider about chandeliers.

Further Considerations :

Weight & Structural Support
Popular finish and crystal designs can be heavy. Standard gyprock ceilings typically hold only 2–3 kg—anything heavier requires reinforced support like timber battens or more robust fixings. This is a critical safety step to prevent installation accidents

Ceiling Height & Clearance
The chandelier’s drop should allow sufficient clearance—approximately 40–80 cm above tables or benches, and a minimum of 2.1 m clearance from the floor. ACE provides guidelines tailored to different ceiling heights to strike the right balance

Professional Installation & Compliance
In Australia, only licensed electricians should install chandeliers. ACE ensures legal compliance, safe wiring, correct earthing, secure supports, fixture testing, and adherence to Australian standards like AS/NZS 3000. DIY attempts can pose risks including fire, shock, or structural failure

For more information about how to choose the correct height for your chandelier, refer to our blog post.

To ensure the rest of your home’s lighting is fit for purpose, watch our short video guide to LED lighting.

Hornsby Electrician Fixes Lights

Posted on: June 21st, 2013 by Ace

Hornsby Electrician Fixes Lights

A lady named Kelly from Hornsby rang me up the other day. She told me that one of her down lights was continually blowing globes and she had just had enough of it ! Her house was quite new, so was frustrated by this issue. She said she had tried a number of other Sydney electricians and none were willing to help her with her little problem. She was very happy when I set up a time within a couple of days.

ACE Saves the Day

We had a look at the down lights. There was actually a couple of them with the problem. I fixed the first one quite quickly. When I pulled the second one down, straight away I noticed I could smell a burning smell as soon as I get close to it. What had actually happened when the house was built, the airconditioner installer and the electrician on the job didn’t talk to each other and an airconditioning duct went right over the top of the down lights. The airconditioning duct was all melted and damaged and it was very lucky that a fire didn’t start because the airconditioning duct had been touching directly against this down light.

I had identified the problem quite quickly. So I recommended the simplest things to do. We couldn’t move the airconditioning duct because it was installed between the first and the second storey. But it was quite easy to move the down light over by about two hundred meter and just totally eliminate the problem. Removing all down lights lined up in a row was simple. Then I cut a hole in the ceiling and I fixed the airconditioning duct so the air going to that outlet can make it all the way through. I patched the hole and she was very happy with the job. She got me to go and have a look at her mom’s house which was right next door. I found a problem with her laundry light switch which was very easy to fix. I fixed this at the same time so she didn’t have to pay two call outs.

Testimonial

Kelly was super impress with the service and provided me with a testimonial. “I used Aaron, because he was the only electrician that I can get to come out very quickly. He was able to respond very quickly and compared to other tradesman, he was neat, clean, professional, informative. I would definitely recommend Aaron to all my family and friends.” She rated us as excellent for neatness and cleanliness, excellent for courtesy and professionalism. Overall Kelly rated us as excellent. A score of five out of five for work area condition and clean up was also given. Her overall satisfaction was a five out of five. So, if you would want to have an electrician that you are totally satisfied and with 100% of time in any suburb of Sydney, please rely on ACE.

If you would like to have your downlights checked, the first thing you should ensure is that you do not have halogen downlights. Find out why.

If you have been thinking about rewiring your lighting, find out how we can help here.

Posts Tagged ‘do i need an electrician to install a light’